韩国三级日本三级香港三级黄-成人免费观看久久免费视频-亚洲精品久久综合-欧美午夜福利视频在线观看-国产裸拍裸体视频在线观看-久久亚洲国产自av-久久精品国产亚洲婷婷-国产粉嫩学生高清网站专区-久久久国产精品色综合-一级特级欧美午夜片免费观看

功能總述

       專為中等載荷的材料測試需求設計，可提供高達10kN的載荷能力，適用于金屬、非金屬材料的拉伸、壓縮、彎曲、剪切、剝離等復雜力學性能測試。此設備具有位移加載速度、載荷加載速度和應變加載速度、蠕變、松弛試驗等功能。系統采用雙立柱高剛性框架結構，結合寬跨距橫梁設計，顯著提升抗偏載能力與測試穩定性，滿足高強度、大變形場景的精準測試需求，同時提供標準及加高機架選項，以滿足不同尺寸試樣和測試場景的需求。

      該試驗機控制器配備2個引伸計插口，且可串聯50N、100N、500N、1000N、2000N、5000N等一只或者多只，可自由組合，且分辨力不低于0.001N，載荷傳感器安全過載300%FS。

      試驗機搭載 TestPilot V3.0測試軟件，具有計算2個引伸計平均功能、剝離強度功能和拉伸、壓縮、彎曲、剪切等試驗方法。

相關標準

• ISO 527-1 Plastics-Determination of tensile properties-part1：General principles

• ISO 527-2 Plastics-Determination of tensile properties-part2：Test conditions for moulding and extrusion plastics

• ISO 604 Plastics-Determination of compressive properties

• ISO 178 Plastics-Determination of flexural properties

• ISO 1922 Rigid cellular plastics-Determination of shear strength

ISO 7743 Rubber，vulcanized or thermoplastic-Determination of compression stress-strain properties

• ISO 34-1 Rubber，vulcanized or thermoplastic-Determination of tear strength-part1：Trouser，angle and crescent test pieces

• ISO 37 Rubber，vulcanized or thermoplastic-Determination of tensile stress-strain  properties

• ISO 1184 Plastics-Determination of tensile properties of films

• ISO 6383-1 Plastics-Film and sheeting Determination of tear resistance- part1：Trouser tear method

• ISO 6383-2 Plastics-Film and sheeting Determination of tear resistance- part2：Elmendorf method

• ISO 3036 Board-Determination of puncture resistance using a pendulum device

• ISO 13934-1 Textiles-Tensile properties of fabrics-part1：Determination of maximum force and elongation at maximum force using the strip method

• ISO 13934-2 Textiles-Tensile properties of fabrics-part2：Determination of maximum force using the grab method

• ISO 13937-2 Textiles-Tear properties of fabrics-part2：Determination of tear force of trouser-shaped test specimens (Single tear method)

• ISO 8510-1 Adhesives-Peel test for a flexible-bonded-to-rigid tset specimen assembly-part1：90°peel

• ISO 8510-2 Adhesives-Peel test for a flexible-bonded-to-rigid tset specimen assembly-part2：180°peel

• ISO 1924.1 Paper and board-Determination of tensile properties-part1：Constant rate of loading methASTM D638 Standard Test Method for Tensile Properties of Plastics

• ASTM D638 Standard Test Method for Tensile Properties of Plastics

• ASTM D695 Standard Test Method for Compressive Properties of Rigid Plastics

• ASTM D790 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

• ASTM D732 Standard Test Method for shear Strength of Plastics by Punch Tool

• ASTM D412 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomers-Tension

• ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

• ASTM F1306  Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

• ASTM D5053 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (strip Method)

• ASTM D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubbre and Thermoplastic Elastomers

• GB/T 1040 《塑料 拉伸性能的測定》

• GB/T 1041 《塑料 壓縮性能的測定》

• GB/T 9341 《塑料 彎曲性能的測定》

• GB/T 328 《建筑防水卷材試驗方法》

• GB/T 2568 《樹脂澆鑄體拉伸性能試驗方法》

• GB/T 529 《硫化橡膠或熱塑性橡膠撕裂強度的測定（褲形、直角形和新月形試樣）》

• GB/T 528 《硫化橡膠或熱塑性橡膠 拉伸應力應變性能的測定》

• GB/T 2790 《膠粘劑180°剝離強度試驗方法 撓性材料對剛性材料》

• GB/T 2791 《膠粘劑T型剝離強度試驗方法 撓性材料對撓性材料》

• GB/T 2792 《膠粘帶剝離強度的試驗方法》

• GB/T 16491 《電子式萬能試驗機》

• GB/T 2611 《試驗機通用技術要求》

• JJG 139 《拉力、壓力和萬能試驗機》

• JJG 475 《電子式萬能試驗機》

技術指標

機架剛度在配置輪輻式傳感器下的測量指標。